12 Problems on Printer, and How to Solved

12 Problems on Printer, and How to Solved??

A printer is a tool used to print documents or photos. Using input from computer or mobile phone and print media is paper. By using the printer we can print a document, photos from small to large size. This discussion is about inkjet printers. A printer that prints by sprinkling the ink that catridge comes to a paper. This time I will share about the problems that often happen to inkjet printer. For First Problem  is a blockage in the head Printer. In addition there are many problems that often occur in inkjet printers.

• 1. Print error / print off.

When your print can not print. first, Check  printer,  check the power supplied to printer. Also Check the connecting cable from the mains to the printer.

Solution : replace the printer power cable.

• 2. The printer is not connected to the computer

This is caused by the USB cable connecting the printer to the computer. The cause of damaged USB cable is the printer is not detected by the computer (offline).

Solution : is to replace the cable. If you want to Check cable USB, you can use multimeter / Avometer to check USB cable damage.

• 3. Printer Driver Error

This data problem causes the process of sending data from computer to printer, Until the data make break connection.

Solution: Uninstall Driver, and install again the printer driver.

• 4. Ink runs out

If the printer ink is depleted, the printer can not print the document. Print remains alive but can not release printing. Do not use printer if the ink runs out, because it will damage the head on the catridge.

Solution: Refill Ink using injecting.

• 5. Catridge is not installed properly

What will happen is the printer will be stuck and will not work normally.

Solution: Open Printer cover, remove catridge and Plug in it again. Make sure the catridge position is correct.

• 6. Dirty cartridge

The cause of this problem is the printer will be dashed.

Solution : do head cleaning. Use the maintenance application, and select the cleaning head. And check back the printer. If maslaah has not been resolved use a tissue to clean the printer head. Use soft tissue and do it slowly.

• 7. Dry ink.

The cause of dry ink is because the printer has long been unused. So the printer stalled / failed to print.

Solution : solution is to do deep cleaning. Use the maintenance application and select deep cleaning. If not solved, use warm water to soak the catridge head. Soak for 1 minute. Then dry, and insert the catridge into the printer again. If still not resolved then you can replace with the new catridge.

• 8. Catrige is broken

The broken cartridge marked with catridge is not detected by the printer. Or if the above problem is not resolved then the solution is to replace the catridge.

• 9. Printer absorber.

The printer has a printing limit, when it has exceeded the limit. Then the priter must be reset. The printer will not be in use / freeze.

Solution: Reset Printer using software.

• 10. Paper Jam

Paper Jam is the existence of paper / other objects that clog in the printer. So the printer stalls.

Solution: Turn off the printer, open the Cover Printer, if it finds the paper / objects are caught, immediately take. And re-plug the printer cover. Test the printer again to make sure the printer has been resolved.

• 11. Paper is too much

Did you know if the printer has a maximum paper limit. On this problem the printer will get stuck or error. So the printer is not working. Do not input paper too much into the printer. So that the printer is not easily damaged.

Solution : use paper thinner. Use enough space for a paper towing roll to pull paper while the printer is operating.

• 12. Roll of paper towel is damaged.

On this problem the printer will be error and jammed. The cause is a paper crusher roll break, or there is an item that makes the roll not function.

Solution: open the printer cover, check Roll the paper, if the roll is broken you can replace the roll. And if there are other problems you can bring to the service center printer.

To this last problem you can analyze your printer's damage. But keep in mind, if the problem is too heavy you can bring the unit to the Service Center Printer in Your Area.

Thanks !!

Related Posts:

Tweet